BASIC52 is quite slow so I've found that to load from Teraterm we need a character delay of 10ms and a line delay of 600ms.
These are set in the 'Swetup', 'Serial Port' menus. Programs such as BASYS can then be entered into the 8052 using Teraterm's 'file', 'send' commands.

Since theres no loader, after manually typing the hello world object code in twice I did a very quick converter to make a keyfile from the assemblers hex file.
You just enter the BASYS 'M' command, give it the address 6000H, then in Teraterm do file, send, out.dat (with the same char & line delays)
I use PC Basic as an 'awk-like' tool for simple quickies like this.

"Hello_s" is the same program with a delay between characters.

https://www.pcbasic.com/

Phil_G
