
The original source files for my "morse/rtty/ascii to centronics converter" project were developed almost 40 years ago on my Eaca Colour Genie for which the tapes are long lost.
All that remained to be recently rediscovered in my loft, was an actual working PCB and a faded, rolled-up printout - which wasnt the final version.
In a burst of nostalgic enthusiasm, I've recently disassembled the original eprom and with help from the printout, recreated the complete & final source.
It assembles fine with either AZ80 or with Zen which I used on the Colour Genie, and which I've ported to the RC2014 mini/micro.
The object code is just under 2k and fits into a 2716 eprom with only a few bytes to spare.
The key thing behind this project, and the main driver for resurrecting it, is that it uses no RAM. 
The PCB has only a Z80, PIO, clock and eprom, it has no read-write memory at all!

The project was developed in 1984 but wasnt published until 1987 (I dont remember why), in Ham Radio Today magazine, scans enclosed.
I dont expect anyone to build this in 2023, but a fellow Z80 fan Brian ("Ready? Z80" on Youtube) posted a video about programming without RAM and this got us talking,
& I thought maybe some aspects of the code might be interesting. Fortunately I always use plenty of source code comments to give myself a chance of remembering what I did...

Cheers
Phil Green, Phil_G on most forums, philg@talk21.com and http://philg.uk



