|
The original 7-channel code has been superseded, below you can choose between the original and the current version: Original code from 2014, as used by Shaun Garrity in RCM&E: P16]  2014 Document for 7 channel proportional encoder using the Arduino, with Single-Channel mix (updated 20/02/19) P17]  2014 Sketch for 7 channel proportional encoder using the Arduino, with Single-Channel mix Updated 2020 code, with minute-minder, s/c speed selection, channel 7 speed selection, AETR/TAER/ETAR channel mapping options, interrupt driven PPM, etc Optional headers for remote switches or on-board Dipswitch for options like mixers, channel mapping etc Runs on the same hardware but first refer to the document: P16a]  Document for 7 channel proportional encoder using the DIYMore 'Strong' board, with S/C mix (new version Feb 2020) P17a]  New sketch for 7 channel proportional encoder using the DIYMore 'Strong' board, with S/C mix (new version Feb 2020) Back to Archive page |